We provide custom built RTK packages. This page is supposed to be just an summary of what people commonly order in terms of as complete and ready off-the shelf auto steer kit as exists with our solution. This set still requires some assembly and configuration on your tractor but it’s very manageable 🙂 Let’s call it a couple of days project to get up and running. If you need ONLY guidance (no auto-steer) then it’s pretty much plug and play and you can be up and running within an hour or two! Please contact us to discuss.
- $3225 Guidance system & RTK kit including base station
- $2525 Ultimate+ 10 RTK Package with field mapping capabilities and comprehensive A/B line guidance, as well as a light bar. Sub inch accurate with your OWN base station! No subscriptions needed.
- $150 plastic cases for both of the receiver boards in the RTK kit.
- $300 50 km (31 mi) RTK range upgrade. Significantly extends the radio link range with a higher powered radio. This is optional.
- 2 x $125 external vehicle mount high gain radio link antenna with 2 m (6.5 ft) low loss cable.
- $2000 comprehensive auto steer kit assembled by Andreas Ortner. Includes the steering wheel motor, PCB board, roll & pitch sensor, wheel angle sensor, ready for installation. Requires a custom steering wheel bracket. The lead time for the auto steer component can be longer. Please note that if your tractor is auto-steer ready, and already has a hydraulic valve installed on it, the cost will be somewhat lower! Some details on the integration here.
The total cost of all of the above components is approximately $5225. Please contact to discuss or to order a unit today!
Why are my agriculture GPS systems a good choice?
All of the units below can’t beat the value I offer. They can’t beat the fact that there’s no subscription. Their functionality is similar. It’s a clear win, from a value perspective! Topcon X14 | Agricision onTrak | Patchwork BlackBox Air | Sixty-5 Grass-Guide | Ag Leader InCommand | Teejet Matrix 430 | Raven Cruizer | Trimble GFX-750 EZ-Guide 250 GFX-350 | CenterLine 220 | John Deere | FieldBee. My systems are compatible with with all tractor brands such as: John Deere, Case IH, Massey Ferguson, New Holland, Fendt, Mahindra, Deutz-Fahr, Kubota, Valtra, Claas, International. I also supply systems for marine navigation, and the same unit can work for both. Please contact me with any questions!